- 您现在的位置：买卖IC网 > Sheet目录473 > MAX2839ASEVKIT+ (Maxim Integrated)KIT EVAL FOR MAX2839A WLP
2.3GHz to 2.7GHz MIMO Wireless
BroadbandRF Transceiver
Table 17. Register 14: HPFSM 3 Register (Address = 01110, Default = 3C5 HEX )
BIT NAME
TXGATE_EN
RESERVED
HPC_STOP_M2<1:0>
HPC_STOP<1:0>
HPC_DELAY<1:0>
HPC_1k_GAIN<1:0>
BIT LOCATION
(0 = LSB)
9
8
7:6
5:4
3:2
1:0
DESCRIPTION
PA driver and DAC on/off state gated by PLL lock detect.
0 = Independent of PLL lock detect
1 = Disable PA driver when PLL lock detect = 0 (default)
Reserved bits—set to default
Rx VGA on-hold highpass corner when RXHP = 1. Test at settings 00, 01, and
11. Only active when Reg15_D9 = 1.
00 = 1kHz
01 = 30kHz
10 = 100kHz
11 = 600kHz (default)
Rx VGA final highpass corner selection. Test at settings 00, 01, and 11.
00 = 100Hz (default)
01 = 1kHz
10 = 30kHz
11 = 100kHz
Rx VGA HPC A and HPC D rising edge delay for 100k, 30k, 1k, and 100Hz
highpass corner. Test at settings 00, 01, and 11.
00 = 0μs
01 = 0.2μs (default)
10 = 0.4μs
11 = 0.6μs
Rx VGA highpass corner duration at 1kHz. Triggered by LNA gain change.
Test at settings 00, 01, and 10.
00 = 0μs
01 = 3.2μs (default)
10 = 6.4μs
11 = 9.6μs
Table 18. Register 15: HPFSM 4 Register (Address = 01111, Default = 201 HEX )
BIT NAME
HP_MODE
RESERVED
HPC_SEQ_BYP
RESERVED
BIT LOCATION
(0 = LSB)
9
8:7
6
5:0
DESCRIPTION
Highpass corner control using RXHP.
0 = Highpass corner switches automatically without RXHP
1 = Highpass corner switches dependent on RXHP (default)
Reserved bits—set to default
Highpass corner switching sequence bypassed during RXHP transition from
1 to 0.
0 = Start switching from highpass corner set by HPC_STOP_M2<1:0> in
register 14 and continue with programmed sequence (default)
1 = Switch from highpass corner set by HPC_STOP_M2<1:0> directly to
final highpass corner set by HPC_STOP<1:0> in register 14.
Reserved bits—set to default
______________________________________________________________________________________
31
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
MAX2839EVKIT+
KIT EVAL FOR MAX2839
MAX2851ITK+
TRANSMITTER MIMO 5GHZ 5CH 68TQFN
MAX2852ITK+
IC RECEIVER DFS 5GHZ 68TQFN
MAX2870EVKIT#
EVAL KIT MAX2870
MAX2904EVKIT
EVAL KIT
MAX3524EVKIT
EVAL KIT MAX3524
MAX3540EVKIT#
KIT FOR MAX3540 DVB TUNER
MAX3541EVKIT+
KIT FOR MAX3541 DVB TUNER
相关代理商/技术参数
MAX2839ASEWO+
制造商:Maxim Integrated Products 功能描述:- Rail/Tube
MAX2839ASEWO+T
功能描述:射频收发器 MAX2557A Eval Kit RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
MAX2839ETN+
功能描述:射频收发器 2.3-2.7GHz Wireless Broadband RF Txr RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
MAX2839ETN+D
功能描述:射频收发器 RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
MAX2839ETN+T
功能描述:射频收发器 2.3-2.7GHz Wireless Broadband RF Txr RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
MAX2839ETN+TD
功能描述:射频收发器 RoHS:否 制造商:Atmel 频率范围:2322 MHz to 2527 MHz 最大数据速率:2000 Kbps 调制格式:OQPSK 输出功率:4 dBm 类型: 工作电源电压:1.8 V to 3.6 V 最大工作温度:+ 85 C 接口类型:SPI 封装 / 箱体:QFN-32 封装:Tray
MAX2839EVKIT+
功能描述:WiFi/802.11开发工具 MAX2839 Eval Kit RoHS:否 制造商:Roving Networks 产品:Evaluation Boards 工具用于评估:RN-171 支持协议:802.11 b/g 频率:2.4 GHz 接口类型:UART 工作电源电压:2 V to 16 V
MAX283X-RD0089
制造商:Maxim Integrated Products 功能描述:INTERFACE BOARD - Bulk